Volvo S80 Owner's Manual page 181

05 During your trip
Towing a trailer
Detachable trailer hitch (accessory)
C
D
A
A - ball holder (1 7/8" ball), B - locking bolt, C -
cotter pin, D - hitch assembly, E - safety wire
attachment
05
Installing the ball holder
1. If necessary, remove the cotter pin from
the locking bolt and slide the locking bolt
out of the hitch assembly.
2. Slide the ball holder into the hitch as-
sembly.
3. Align the hole in the ball holder with the
one in the hitch assembly.
4. Slide the locking bolt through the hitch
assembly/ball holder.
5. Insert the cotter pin in the hole at the
end of the locking bolt.
180
Removing the ball holder
1. Remove the cotter pin from the locking
bolt and slide the locking bolt out of the
ball holder/hitch assembly.
2. Pull the ball holder out of the hitch
assembly.
NOTE
A cover for the hitch assembly is also in-
E
B
cluded in the kit.