Volvo S80 Owner's Manual page 133

04 Comfort and driving pleasure
Audio system
Radio functions
7
6
04
5
Center console, controls for radio functions
Navigation button for automatic tuning
Press to cancel a menu selection or a
selected function
Manual tuning
Scan the current wave band
Auto store the strongest radio stations in
the area in which you are driving
Station preset buttons
Select wave band AM and FM (FM1 and
FM2)
Automatic tuning
1. Select a wave band using FM or AM.
2. Press / on the navigation button.
132
Manual tuning
1. Select a wave band using FM or AM.
2. Turn TUNING to select a station.
Preset
Ten station presets can be stored for each
wave band. FM has two memories for pre-
1 2 3
sets: FM1
played through the car's speakers can be
stored as presets. The stored presets are
selected using the preset buttons.
4
Preset storage can be carried out manually
or automatically.
Manually storing preset stations
1. Tune into a station.
2. Hold in one of the preset buttons until
the message
on the display.
Automatically storing preset stations
The function is especially useful in areas
where the radio stations and their frequen-
cies are unfamiliar. The ten strongest radio
stations are stored automatically in a sepa-
rate memory.
1. Select a wave band using FM or AM.
2. Hold in AUTO until
pears on the display.
Once Autostoring...
display, the stations are stored. The radio
and FM2. Only radio stations
Channel stored appears
Autostoring... ap-
disappears from the
continues in Auto mode and Auto
on the display. The automatically stored pre-
sets can now be selected using the preset
buttons. Automatic preset storage can be
cancelled using EXIT.
Auto mode is cancelled by pressing for
example AUTO or FM.
Returning to Auto mode provides access to
the autostored presets:
1. Press AUTO.
Auto appears on the display.
2. Press a preset button.
Scan
The function automatically searches the cur-
rent wave band for strong stations. When a
station is found, it is played for approx.
eight seconds before scanning is resumed.
While the station is playing it can be stored
as a preset as usual.
1. Select a wave band using AM or FM.
2. Press SCAN.
SCAN appears on the display. Close using
SCAN or EXIT.
appears