WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Follow the procedure from step 1 to step 2 in
Procedure
1
Locate the memory-module slot on the system board.
For more information, see
2
Push the securing clips away from the memory module.
3
Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
CAUTION:
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it
from the slot.
NOTE:
Repeat step 2 to step 3 to remove any other memory modules installed in your computer.
Removing the memory modules
computer. After working inside your computer, follow the instructions in
"Removing the power-supply
"System-board
components".
www.dell.com/
unit".
Removing the memory modules
28
After working inside
55