Removing The Chassis Fan; Prerequisites; Procedure - Dell XPS 8930 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the right-side cover.
2 Follow the procedure from step 1 to step 2 in
3 Remove the blower and heat-sink
4 Remove the VR heat sink. (if installed)
Procedure
1 Remove the chassis-fan cable from the routing guide on the chassis-fan bracket.
2 Disconnect the chassis-fan cable from the system board.
For more information, see
3 Remove the screw that secures the chassis-fan bracket to the chassis.
4 Slide the chassis-fan assembly towards the front of the computer to release the fan from the chassis.
5 Lift the chassis-fan assembly off the chassis.
78

Removing the chassis fan

computer. After working inside your computer, follow the instructions in
"Removing the power-supply
assembly. (if installed)
"System-board components".
Removing the chassis fan
unit".
40
After working inside
www.dell.com/