Instrument Markings - Agilent Technologies 8510C Service Manual

before you operate the instrument. This product has been designed and tested in accordance with
international standards.
The WARNING notice denotes a hazard. It calls attention to a procedure, practice,
WARNING
or the like, that, if not correctly performed or adhered to, could result in personal
injury. Do not proceed beyond a WARNING notice until the indicated conditions are
fully understood and met.
The CAUTION notice denotes a hazard. It calls attention to an operating procedure,
CAUTION
practice, or the like, which, if not correctly performed or adhered to, could result in
damage to the product or loss of important data. Do not proceed beyond a CAUTION
notice until the indicated conditions are fully understood and met.

Instrument Markings

When you see this symbol on your instrument, you should refer to the instrument's instruction
manual for important information.
This symbol indicates hazardous voltages.
The C-tick is a registered trademark of the Australian Spectrum Management Agency.
This symbol indicates that the instrument requires alternating current (ac) input.
The CE mark is a registered trademark of the European Community. If it is accompanied by a
year, it indicates the year the design was proven.
The CSA mark is a registered trademark of the Canadian Standards Association.
ICES/NMB-001 This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
1SM1-A This text indicates that the instrument is an Industrial Scientific and Medical Group 1 Class A
product (CISPER 11, Clause 4).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is OFF or in STANDBY position.
iv 8510C On-Site Service Manual