Arp Inspection Statistics; Arp Inspection Vlan - TRENDnet PoE Web Smart Switch Series User Manual

TRENDnet User's Guide

ARP Inspection Statistics

Security > Dynamic ARP Inspection > ARP Inspection Statistics
1. Log into your switch management page (see
on page 5).
2. Click on Security, click on Dynamic ARP Inspection, and click on ARP Inspection
Statistics
3. Select the VID List then click Clear.
4. At the bottom of the left hand panel, click Save.
5. Select the Config you would like to save the settings to, click Save Settings to Flash,
then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"

ARP Inspection VLAN

Security > Dynamic ARP Inspection > ARP Inspection VLAN
1. Log into your switch management page (see
on page 5).
2. Click on Security, click on Dynamic ARP Inspection, and click on ARP Inspection VLAN
3. Select the Log Buffer then Apply to view.
PoE Web Smart Switch Series
"Access your switch management page"
95