Setting Up The Monitor; Installation - Philips 24E1N1300AE User Manual

2 Setting up the
monitor

2.1 Installation

1 Package contents
Screwdriver
*USB C-A
*Different according to region
Monitor
1000 Series
Quick Start
Register your product and get support at www.philips.com/welcome
Power *HDMI
*USB C-C *USB C-C/A
2 Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
24E1N1300AE 2. Hold the stand with both hands.
27E1N1300AE
27E1N1600AE
(1) Gently attach the stand to the
VESA mount area.
(2) Use a screwdriver to tighten the
assembly
stand to the
(3) Gently attach the base to the
stand. Use your fingers to tighten
the screw located at the bottom
of the base, and secure the base
to the stand tightly.
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
5
screws, and secure the
monitor tightly.