Control Front Panel - Eaton COOPER POWER Series Installation And Operation Instructions Manual

Control front panel

The Form 6 control front panel is illustrated in Figure 2.
The front panel is separated into two clearly identified, color-
coded sections:
The top portion of the front panel is used for programming
● ●
the control and providing LED status indication.
The lower portion of the front operating panel is used for
● ●
operating the control and recloser.
The control includes a Power Save feature that will turn off
the backlit LCD display and all LEDs (except Hot Line Tag) if
no front panel keypad is pressed within ten minutes. Pressing
the LAMP TEST key will re-activate the display and LEDs.
LED Indicators
LCD Menu Function Keys
One-Touch
Analysis Keys
Cursor Movement Arrows
LCD Display
Dedicated
Function Keys
TRIP (LOCKOUT)
Pushbutton
(Hardwire Connected)
Figure 2 . Form 6 recloser control front panel
CONTROL OK
A PHASE FAULT
CONTROL POWER
B PHASE FAULT
CONTROL LOCKOUT C PHASE FAULT
RECLOSER OPEN GROUND FAULT
RECLOSER CLOSED SENSITIVE GND
METERING
RESET
TARGETS
F1
EVENTS
MENU
LAMP TEST
ENTER
COOPER POWER
SERIES
TRIP CLOSE
(LOCKOUT)
CLOSE Pushbutton
OPERATION AND INSTALLATION INSTRUCTIONS MN280075EN July 2018
Form 6 microprocessor-based rack-mount recloser control
N otee: The Power Save feature is a ProView interface
software default setting. This feature can be disabled
via the ProView interface software.
The control includes a Reset Menu feature that will cause
the LCD display to revert to the root menu after ten minutes
of inactivity.
The ten minute timer and MMI Reset Menu is a
N otee:
ProView interface software default setting. The menu
selection and timer can be changed via the ProView
interface software.
ALARM A PHASE VOLTAGE
ABOVE MIN TRIP B PHASE VOLTAGE
INDICATOR 1 C PHASE VOLTAGE
INDICATOR 2 FREQUENCY TRIP
INDICATOR 3 VOLTAGE TRIP
F2 F3 F4
+
—
F6 Recloser Control
ON
NON
GND TRIP
RECLOSING
BLOCKED
ALTERNATE ALTERNATE
HOT LINE TAG
PROFILE #1 PROFILE #2
OPTION #1 OPTION #2
Hot Line Tag Toggle Switch and
Three-Segment LED Indication
INDICATOR 4
INDICATOR 5
INDICATOR 6
INDICATOR 7
INDICATOR 8
LCD Display
SETTINGS
OPER
COUNTER
One-Touch
Analysis Keys
ALARMS
CHANGE
LCD Display
Dedicated
RS-232 DATA PORT
Function Keys
SUPERVISORY
RS-232
OFF
Configuration
ALTERNATE
Data Port
PROFILE #3
One-Touch
OPTION #3
Function Keys
3