Lcd Interface Operation; Display And Control Buttons; Presentation; How To Use The Control Buttons - Eaton eNMC2 User Manual

3 LCD interface operation

3.1 Display and control buttons

3.1.1 Presentation

The PDU has a four-button, graphical LCD display. Use the control buttons to change the screen display, retrieve specific
performance data, or change configuration values.
The display view can also change automatically.
For example, the display changes to show active alarms as they occur, or particular displays update due to a change in operating
state.
A backlight is used to light up the display with white and blue:
• The backlight turns off automatically when no button has been pressed for 15 minutes and there is no active alarm.
• Any active alarm will cause the backlight to turn on automatically.

3.1.2 How to use the control buttons

Button When on the Main menu
Returns to the Start-up screen.
Opens the selected menu.
NOTE: When menu items are
highlighted, they are selected.
Scrolls up or down through the list of
menu items.

3.2 Operation mode

3.2.1 Startup screen

When the PDU powers up, the Startup screen displays. Press ENTER to go to the Main Menu.
When in Screensaver mode
Returns to the previous display screen
before entering the screensaver mode.
Returns to the previous display screen
before entering the screensaver mode.
Returns to the previous display screen
before entering the screensaver mode.
Display and control buttons
When in Menu mode
Returns to the previous display screen.
Signals that you want to set the values as
displayed on the screen.
NOTE: On information screens, this
button has no action.
Scrolls up or down to the next screen or
value.
LCD interface operation – 25