Summary of Contents for Eaton Cooper Power RTE EL-BAY-O-NET FUSE
Page 1
COOPER POWER Fusing Equipment SERIES Effective November 2016 MN132024EN Supersedes June 1991 (S240-72-1) RTE® EL-BAY-O-NET FUSE Re-Fusing Instructions...
CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to...
FOR LIFE FOR LIFE Eaton meets or exceeds all applicable industry standards relating to product safety in its Cooper Power™ series products. We actively promote safe practices in the use and maintenance of our products through our service literature, instructional training programs, and the continuous efforts of all Eaton employees involved in product design, manufacture, marketing, and service.
Re-fusing instructions Release internal pressure with pressure relief valve if Introduction available. Eaton’s Cooper Power series Bay-O-Net fuse is designed for use in padmounted or subsurface distribution transformers filled with transformer oil or approved equivalent. Read this manual first Eaton’s Cooper Power series EL Bay-O-Net is designed to be operated in accordance with normal safe operating procedures.
Page 6
RTE® EL-BAY-O-NET FUSE Fuse Fuse Holder Hook Eye Fuse Cap Fuse Follower Figure 3 . EL Bay-O-Net Fuse Then hold for approximately 30 seconds to allow With the proper fuse selected, carefully mate the transformer oil to drain from the fuse unit. Slowly threads of the fuseholder to those at one end of the withdraw the fuse unit and pull it all the way out.
Page 7
RTE® EL-BAY-O-NET FUSE his page is intentionally left blank. Re-Fusing instRuctions MN132024EN November 2016...
Need help?
Do you have a question about the Cooper Power RTE EL-BAY-O-NET FUSE and is the answer not in the manual?
Questions and answers