Related Manuals for Icron USB 2.0 Ranger 442
Summary of Contents for Icron USB 2.0 Ranger 442
-
Page 1: User Guide
USB 2.0 Ranger 442 and USB 2.0 Ranger 444 User Guide USB 2.0 Ranger 442 Model Shown Powered by ExtremeUSB®... - Page 2 00-00218 through 00-00222 (Ranger 444). FCC Radio Frequency Interference Statement Warning The USB 2.0 Ranger 442 and USB 2.0 Ranger 444 have been tested and found compliant with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when installed and operated in a commercial environment.
-
Page 3: Table Of Contents
User Guide Contents Introduction....................1 USB 2.0 Ranger Product Contents............. 1 About the USB 2.0 Ranger................. 2 Before You Begin ..................5 Installing the LEX unit................5 Installing the REX unit ................5 Connecting the LEX unit to the REX unit ..........5 Checking the Installation................ - Page 4 USB 2.0 Ranger 442 and USB 2.0 Ranger 444 Notes...
-
Page 5: Introduction
2-strand fiber-optic cabling with two information outlets and two 2-strand fiber-optic patch cords with Duplex LC connectors (if using premise cabling) : For the USB 2.0 Ranger 442, the maximum length of the NOTE multimode fiber-optic (MMF) cable, including patch cords, must not exceed 500m on 50/125µm MMF or 300m on 62.5/125µm... -
Page 6: About The Usb 2.0 Ranger
USB technology beyond the desktop. With the USB 2.0 Ranger 442, utilizing multimode fiber, USB devices can be located up to 500 meters from the host computer. With the USB 2.0 Ranger 444, utilizing singlemode fiber, USB devices can be located up to 10km from the host computer. - Page 7 User Guide The REX unit: USB 2.0 Ranger 442 and USB 2.0 Ranger 444 The REX unit connects to a USB device using a conventional USB cable. The REX unit allows you to connect up to four USB devices. Additional devices may be connected by attaching a conventional USB hub to the REX unit.
- Page 8 USB 2.0 Ranger 442 and USB 2.0 Ranger 444 Network Cabling USB 2.0 Ranger 442 The LEX unit and the REX unit are interconnected by up to 500 meters of fiber-optic cabling. Two strands of 50/125µm MMF or 62.5/125µm MMF cabling are required.
-
Page 9: Before You Begin
User Guide Before You Begin Before you can install the USB 2.0 Ranger, you need to prepare your site. 1. Determine where the host computer is to be located and set up the computer. 2. Determine where you want to locate the USB device(s). 3. -
Page 10: Checking The Installation
4. Plug the other end of the second patch cord into the fiber-optic information outlet near the USB device. : If you are installing a USB 2.0 Ranger 442 unit, the NOTE maximum length of the fiber-optic cable, including patch cords, must not exceed 500 meters. -
Page 11: Troubleshooting
User Guide Troubleshooting The following table provides troubleshooting help. The topics are arranged in the order in which they should be executed in most situations. If you are unable to resolve the problem after following these instructions, please contact technical support for further assistance (see page 12). Symptoms/Cause Remedy All LEDs on LEX unit are... - Page 12 USB 2.0 Ranger 442 and USB 2.0 Ranger 444 Symptoms/Cause Remedy A device is connected to the 1. Disconnect the USB 2.0 Ranger from the REX unit and the computer. corresponding Device LED 2. Connect the USB device directly to the is off USB port on the computer.
-
Page 13: Specifications
User Guide Specifications Range: Ranger 442 500 meters (1650 ft) on 50/125µm MMF 300 meters (1000 ft) on 62.5/125µm MMF Range: Ranger 444 10,000 meters (33,000 ft) on 9/125µm SMF USB device support High-speed devices (480 Mbps) Full-speed devices (12 Mbps) Low-speed devices (1.5 Mbps) USB host support EHCI (USB 2.0) only... - Page 14 USB 2.0 Ranger 442 and USB 2.0 Ranger 444 Ranger 444 Link cable Two strands of 9/125µm SMF cabling are (not included) required. The cabling subsystem must provide a duplex connection with crossover, and must be terminated with Duplex LC connectors at both ends.
-
Page 15: Limited Hardware Warranty
Hardware Remedies Icron Technologies Corporation’s entire liability and the Licensee’s exclusive remedy for any breach of warranty, shall be, at Icron Technologies Corporation’s option, either (a) return of the price paid or (b) repair or replacement of hardware, which will be warranted for the remainder of the original warranty period or 30 days, whichever is longer. -
Page 16: Obtaining Warranty Service
The repaired or replaced item will be shipped to you, at Icron Technologies Corporation’s expense, not later than thirty days after Icron Technologies Corporation receives the defective product. - Page 17 Icron Technologies Corporation 4664 Lougheed Highway, Suite 275 Burnaby, BC V5C 5T5 Canada Tel: 604-638-3920 Fax: 604-638-3930 www.icron.com 90-00231-A01...
Need help?
Do you have a question about the USB 2.0 Ranger 442 and is the answer not in the manual?
Questions and answers