Technaxx TX-110 User Manual page 3

Product overview
The rear view camera sends a video signal from the camera on
channel 4 in the 2.4GHz frequency range (specified for such video
transmissions) to the monitor. In case another Bluetooth handsfree
device is installed in your vehicle, it works in the same frequency
range as the camera. If that handsfree device is activated, it may
cause disturbances. Therefore we recommend to deactivate that
other Bluetooth handsfree device while using the reversing system.
Video cable (included): In order to give you the possibility to use a
reversing camera despite another Bluetooth handsfree device in
your vehicle, a video cable is included. With this cable the video
signal can be transmitted to the monitor. So connect alternatively
the video cable to the camera and lay it inconspicuously in the
vehicle. For permanent operation with the video cable, remove the
antenna from the monitor.
License plate holder with camera
1 Infrared-LED
2 Camera
3 Holder
4 Connection cable