Aroma Smartphone Car Holder TE15
Aroma Smartphone holder for car's ventilation grilles
The Declaration of Conformity is under the Internet link: www.technaxx.de/
(in bottom bar "Konformitätserklärung"); Before using the device, read the user
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks). Free Email:
First Steps
Push the TE15 holder's cover on the back in the direction of the arrow (see
picture). Take out a new Aroma Tab from the Aroma Tab package and insert it
in the free space for the Tabs; or take out the old Aroma Tab by pulling the
plastic part, and then insert a new one. Close the holder's cover against the
arrow direction.
Place the screw cap over the
ball joint of the ventilation bracket
(see left in the figure). Do not twist
yet!
Snap the vent holder onto the
TE15 mount's ball joint. You will
hear a "snap" sound when it is
properly connected.
Tighten the screw cap to the
cradle by turning it clockwise.
Weight / Dimensions: 71g (with Aroma tab) / (L) 8.5 x (D) 10 x (H) min.11/max.17cm
®
Technaxx
manual carefully.
support@technaxx.de
Suitable for Smartphones of 3.5-6 inches
* User Manual
Need help?
Do you have a question about the TE15 and is the answer not in the manual?
Questions and answers