Vpc Orphan-Port Suspend - Cisco Nexus 5000 Series Command Reference Manual

vpc orphan-port suspend

vpc orphan-port suspend
To suspend a nonvirtual port channel (vPC) port when the peer link of a vPC secondary goes down, use the
vpc orphan-port suspend command. To resume the non-vPC port, use the no form of this command.
vpc orphan-port suspend
no vpc orphan-port suspend
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Interface configuration mode.
Command History
Release
5.0(3)N2(1)
Usage Guidelines
A non-vPC port, also known as an orphaned port, is a port that is not part of a vPC.
Examples This example shows how to suspend an orphan port:
switch(config)# interface ethernet 1/20
switch(config-if)# vpc orphan-port suspend
switch(config-if)#
Related Commands
Command
show vpc brief
show vpc orphan-ports
Cisco Nexus 5000 Series Interfaces Command Reference
186
Modification
This command was introduced.
Description
Displays brief information about the vPCs.
Displays information about orphan ports.
U and V Commands