Show Interface Loopback - Cisco Nexus 5000 Series Command Reference Manual

show interface loopback

show interface loopback
To display information about the loopback interface, use the show interface loopback command.
show interface loopback lo-number [brief| description]
Syntax Description
lo-number
brief
description
Command Default
None
Command Modes
EXEC mode
Command History
Release
5.0(3)N1(1)
Examples This example shows how to display the configuration information for a specific loopback interface:
switch# show interface loopback 10
loopback10 is up
Hardware: Loopback
MTU 1500 bytes, BW 8000000 Kbit, DLY 5000 usec,
Encapsulation LOOPBACK
switch#
Teh following table describes the significant fields shown in the display.
Cisco Nexus 5000 Series Interfaces Command Reference
120
reliability 255/255, txload 1/255, rxload 1/255
0 packets input 0 bytes
0 multicast frames 0 compressed
0 input errors 0 frame 0 overrun 0 fifo
0 packets output 0 bytes 0 underruns
0 output errors 0 collisions 0 fifo
Loopback interface number. The range is from 0 to
1023.
(Optional) Displays a brief summary of the loopback
interface information.
(Optional) Displays the description provided for the
loopback interface.
Modification
This command was introduced.
Show Commands