Show Port-Channel Traffic - Cisco Nexus 5000 Series Command Reference Manual

show port-channel traffic

show port-channel traffic
To display the traffic statistics for EtherChannels, use the show port-channel traffic command.
show port-channel traffic [interface port-channel number [. subinterface-number]]
Syntax Description
interface
port-channel number
.subinterface-number
Command Default
None
Command Modes
EXEC mode
Command History
Release
4.0(0)N1(1a)
Examples This example shows how to display the traffic statistics for all EtherChannels:
switch# show port-channel traffic
ChanId
------ --------- ------- ------- ------- ------- ------- -------
------ --------- ------- ------- ------- ------- ------- -------
4000
4000
4000
4000
switch#
This example shows how to display the traffic statistics for a specific EtherChannel:
switch# show port-channel traffic interface port-channel 10
ChanId
Cisco Nexus 5000 Series Interfaces Command Reference
154
Port Rx-Ucst Tx-Ucst Rx-Mcst Tx-Mcst Rx-Bcst Tx-Bcst
10 Eth1/7 0.0%
10 Eth1/8 0.0%
10 Eth1/9 0.0%
10 Eth1/10 0.0%
Eth1/1 0.0%
Eth1/2 0.0%
Eth1/3 0.0%
Eth1/4 0.0%
Port Rx-Ucst Tx-Ucst Rx-Mcst Tx-Mcst Rx-Bcst Tx-Bcst
(Optional) Displays traffic statistics for a specified
interface.
(Optional) Displays information for a specified
EtherChannel. The range is from 1 to 4096.
(Optional) Subinterface number. Use the
EtherChannel number followed by a dot (.) indicator
and the subinterface number. The format is
portchannel-number.subinterface-number.
Modification
This command was introduced.
0.0% 0.0% 0.0%
0.0% 0.0% 0.0%
0.0% 0.0% 0.0%
0.0% 0.0% 0.0%
0.0% 99.64% 99.81%
0.0% 0.06% 0.06%
0.0% 0.23% 0.06%
0.0% 0.06% 0.06%
0.0% 0.0%
0.0% 0.0%
0.0% 0.0%
0.0% 0.0%
0.0% 0.0%
0.0% 0.0%
0.0% 0.0%
0.0% 0.0%
Show Commands