show interface switchport backup
301)
port-channel500
port-channel502
port-channel504
switch#
The following table describes the significant fields displayed in the output.
Table 3: show interface switchport backup Field Descriptions
Field
Active Interface
Backup Interface
State
Preemption Mode
Preemption Delay
Multicast Fast Convergence
Bandwidth
Related Commands
Command
switchport backup interface
show running-config backup
show running-config flexlink
Cisco Nexus 5000 Series Interfaces Command Reference
138
Preemption Delay : 35 seconds (default)
Multicast Fast Convergence
Bandwidth : 20000000 Kbit (port-channel300), 10000000 Kbit (port-channel
port-channel501
Preemption Mode
: off
Multicast Fast Convergence
Bandwidth : 100000 Kbit (port-channel500), 100000 Kbit (port-channel501)
port-channel503
Preemption Mode
: off
Multicast Fast Convergence
Bandwidth : 100000 Kbit (port-channel502), 100000 Kbit (port-channel503)
Ethernet2/1
Preemption Mode
: off
Multicast Fast Convergence
Bandwidth : 100000 Kbit (port-channel504), 0 Kbit (Ethernet2/1)
: On
Active Down/Backup Down
: On
Active Down/Backup Down
: Off
Active Down/Backup Down
: Off
Description
Layer 2 interface being configured.
Layer 2 interface to act as a backup link to the
interface being configured.
Flex Links status.
Preemption scheme for a backup interface pair.
Preemption delay configured for a backup interface
pair.
Fast convergence configured on the backup interface.
Bandwidth configured on the backup interface.
Description
Configures Flex Links.
Displays the running configuration information for
backup interfaces.
Displays the running configuration information for
Flex Links.
Show Commands