Cisco Nexus 5000 Series Command Reference Manual page 161

Interface
Hide thumbs Also See for Nexus 5000 Series:
Table of Contents

Advertisement

Show Commands
This example shows how to display the port channel load-balancing information when hardware hashing is
not used to determine the outgoing port ID:
switch# show port-channel load-balance forwarding-path interface port-channel 10 vlan 1
dst-ip 192.168.2.25 src-ip 192.168.2.10 dst-mac ffff.ffff.ffff src-mac aa:bb:cc:dd:ee:ff
l4-src-port 0 l4-dst-port 1
Missing params will be substituted by 0's.
Load-balance Algorithm on switch: source-dest-port
crc8_hash: Not Used
Param(s) used to calculate load-balance (Unknown unicast, multicast and broadcast packets):
switch#
This example shows how to display the port channel load-balancing information when MCT is enabled and
traffic flows from a vPC peer link:
switch# show port-channel load-balance forwarding-path interface port-channel 10 vlan 1
dst-ip 192.168.2.25 src-ip 192.168.2.10 dst-mac ffff.ffff.ffff src-mac aa:bb:cc:dd:ee:ff
l4-src-port 0 l4-dst-port 1
Missing params will be substituted by 0's.
Load-balance Algorithm on switch: source-dest-port
crc8_hash: Not Used
crc8_hash: Not Used
Param(s) used to calculate load-balance (Unknown unicast, multicast and broadcast packets):
switch#
This example shows how to display the port channel load-balancing information when hardware hashing is
used to determine the outgoing port ID:
switch# show port-channel load-balance forwarding-path interface port-channel 10 vlan 1
dst-ip 192.168.2.25 src-ip 192.168.2.10 src-mac aa:bb:cc:dd:ee:ff l4-src-port 0 l4-dst-port
1
Missing params will be substituted by 0's.
Load-balance Algorithm on switch: source-dest-port
crc8_hash: 204
Param(s) used to calculate load-balance:
switch#
Related Commands
Command
port-channel load-balance ethernet
Outgoing port id: Ethernet1/1
dst-mac:
ffff.ffff.ffff
vlan id:
1
Outgoing port id (non vPC peer-link traffic): ethernet1/2
Outgoing port id (vPC peer-link traffic): Ethernet1/1
dst-mac:
ffff.ffff.ffff
vlan id:
1
Outgoing port id: Ethernet1/1
dst-port: 1
src-port: 0
dst-ip:
192.168.2.25
src-ip:
192.168.2.10
dst-mac:
0000.0000.0000
src-mac:
aabb.ccdd.eeff
show port-channel load-balance
Description
Configures the load-balancing method among the
interfaces in the channel-group bundle.
Cisco Nexus 5000 Series Interfaces Command Reference
151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents