Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
View client distribution, connected clients,
and client trends
To view the clients that are connected to the access point, either over WiFi or
through an Ethernet connection:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Locate the Client Distribution pane (shown on the left side in the following figure)
and the Recent Clients pane (shown on the right side).
Monitor the Access Point and the
Network
197
User Manual