View Or Change The Settings For A Dhcp Server - NETGEAR WAC510 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
(Continued)
Setting
Ending Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Primary WNS
Secondary WNS
Lease
7. Click the Apply button.
Your settings are saved.
8. To view the SSIDs to which the DHCP server is assigned, click the SSID link just below
the VLANID field at the top of the page.

View or change the settings for a DHCP server

The information in this section applies only when the system mode of the access point
is Router mode (see Change the system mode to Router mode or AP mode on page
162). If it is, the default DHCP server of the access point is enabled and you can also add
up to seven additional DHCP servers for WiFi clients only.
You can view or change the setting of a DHCP server that you added. For information
about the default DHCP server, see Manage the default DHCP server on page 149.
To view or change the setting of a DHCP server:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
Manage the Local Area Network
and IP Settings
Description
Enter the ending IP address of the DHCP IP address range.
Enter the subnet mask that is used for all IP addresses in the DHCP IP address range.
The IP address of the gateway that is used by your Internet modem.
The IP address of the primary Domain Name System (DNS) server that is used by your
Internet modem.
The IP address of the secondary DNS server that is used by your Internet modem.
Or leave this field blank.
The IP address of the primary Windows Internet Name Service (WINS) server that is
used by your Internet modem, if any.
The IP address of the secondary WINS server that is used by your Internet modem.
Or leave this field blank.
From the menus, specify the duration of the IP address lease. By default, the lease
expires after one day (24 hours), after which the WiFi client must renew the lease.
153 User Manual