Download Print this page

Features; Breeze; Comfort; Select - Daikin ARC447A3 Quick User Manual

Quaternity controller

Advertisement

QUG-ARC447A3-09/09
9.
HUM % : Press up/down arrows
De-Humidification Control setting. To lower the space
temperature and humidity, select COOLING operation
with the required setpoint temperature. The
de-humidification setting can then be set as per the
following table. To lower the space humidity with a
minimal effect on the room temperature, select DRY
operation and the required de-humidification setting as per
the following table. The allowable temperature drift from
the current room temperature can also be set in the DRY
mode using the TEMP button.
COOLING
64°F – 90°F (18°C – 32°C)
OFF
HIGH
STD
MULTI-MONITOR
GREEN
ON/OFF

FEATURES

10. BREEZE: Pressing
the airflow louvers, resulting in a naturally cooler
temperature, similar to fresh air. The Cooling Breeze
function is available in COOLING, DRY COOLING, DRY,
and FLASH STREAMER AIR PURIFYING operation.
11. COMFORT: Press
direction to prevent air from blowing directly on room
occupants.
12. SELECT: Press
up/down arrows to adjust the Timer
and the Set Up functions.
13. TIMER: Timer functions can automatically switch the unit
on or off at night or in the morning. Set the timer for each
use.
COUNTDOWN OFF TIMER operation: Use the select
button to choose a time for the timer to go OFF. The time
advances in half-hour increments and a range of 0.5 to 9.5
hours can be set. At the desired time, press
TIMER lamp lights.
ON/OFF TIMER operation:
Set the time for timer-ON or timer-OFF. Set the clock if the
displayed time is incorrect. Press the SELECT button to
set the time to be reserved. Holding down the button
advances the time faster. Press OFF for OFF TIMER and
ON for ON TIMER. Use Select arrows to set the time to be
reserved. The Timer lamp illuminates. Press Cancel and
the Timer lamp goes off.
Starting COUNTDOWN OFF TIMER and OFF TIMER
causes the unit to automatically change the setpoint
temperature 1 hour later to prevent the room from
becoming too cold or too hot. It goes up 1 ° F during
DRY COOLING and goes down 3.6 ° F during heating. The
setpoint programmed in the controller is reached. When
QUG-ARC447A3-09/09
to change the
DRY COOLING
DRY
-5°F (-3°C )–STD
LOW
CONT
HIGH
STD
LOW
YELLOW
activates rapid oscillation of
to provide airflow rate and
operating the unit via the COUNTDOWN OFF TIMER or
OFF TIMER, the actual length of operation may vary from
the time entered by the user. Once you set the on/off
timer, the time frame setting is kept in memory but the
COUNTDOWN OFF TIMER does not have this memory
function. The memory is cancelled when the remote
controller batteries are replaced. COUNTDOWN OFF
TIMER and OFF TIMER funcitons are not available if
POWERFUL or COMFORT SLEEP options are selected.
To combine ON TIMER and OFF TIMER:
CONT
Press
Press
Press
it once more to cancel COUNTDOWN OFF TIMER only
14. CLOCK button: Press
Display Screen is correct.
15. FAN: Press
addition to Quiet and Automatic Operation. Each
pressing of the button advances the airflow setting.
NOTE: If set to Quiet (
system capacity will reduce in additon to the sound level.
If set to Automatic
adjusts, depending on the difference between the
setpoint and the actual room temperature.
.The
16. SWING buttons: Press
and press
direction.
17. SET UP: Press
remote controller display to your preference. The item
changes every time it is pressed. The settings change
every time the SELECT button is pressed respectively.
18. CHILD LOCK: Push button for 2 seconds to lock. Press
again for 2 seconds to release.
19. C-SLEEP: The C-SLEEP
controls the room temperature to maintain a comfortable
sleeping environment.
20. RESET ALARM: Press
cleaning to reset alarm for next time to clean.
21. CANCEL: Press to cease prior Timer selections.
and then
to cancel the ON TIMER only.
and then
to cancel the OFF TIMER only.
several times to reach 9.5 hours and then press
to check that the time on the
for five levels of airflow available in
displays on LCD screen), the
, the airflow rate automatically
to change vertical airflow
to change the horizontal airflow
to set the unit operation and
(Comfort Sleep) button
for 2 seconds after
2

Advertisement

loading