Daikin ARC447A3 Quick User Manual

ARC447A3 Quaternity Controller Quick User Guide
1. Display
Screen
2. ON/OFF
3. OFF TIMER
4. Direct
Operation
5. TEMP
6. CLEAN
Flash Streamer
Air Purifying
Note: For effective operation, this controller should be
pointed at the infrared receiver on the indoor unit. The
maximum distance for communication is 23ft (7m).
FUNCTIONS
1. DISPLAY SCREEN: Displays current system settings and
setpoint temperature. The protection sheet is on the
display to protect it from scratches. Remove it before use.
2. ON/OFF: Press
button again when the unit is off will restart the same
operation.
3. OFF TIMER: Pressing
time in half hour increments. The time from 0.5 to 9.5
hours can be set. Once selected the timer lamp will
illuminate. Set for ON TIMER or OFF TIMER. Check that
clock is correct and reset if not.
4. DIRECT OPERATION BUTTONS: Select COOL, HEAT
DRY, or AUTO.
COOL: Press for cooling. The multi-monitor lamp
will turn GREEN.
HEAT: Press for heating. The multi-monitor lamp
will turn RED.
DRY: Press to lower humidity and minimize
changes in room temperature.The multi-monitor lamp will
turn YELLOW.
1
Open Cover View:
7. INFO
8. POWERFUL
9. HUM %
Humidity Button
to stop operation. Pressing the
changes the displayed
10. BREEZE
11. COMFORT
12. SELECT
13. TIMER
14. CLOCK
button
Use this Controller with
Quaternity units:
FTXG_HVJU
RXG_HVJU
AUTO: Pressing
system to operate in either cooling or heating, depending
on the controller setpoint and room conditions. To stop
any operation press
5. TEMP: Press up/down arrows
temperature higher or lower. Press SET UP, then use the
SELECT up/down arrows to change
brightness, beep volume, or contrast.
6. CLEAN Flash Streamer Air Purifying: Cleans and
purifies the room air. Press
reflects
bad odors and viruses by absorbing and decomposing
them. The multi-monitor lamp turns white and illuminates
for the first 2 seconds of operation. The Air Purifying
function automatically cancels after 2 hours.
7. INFO: Press while pointing the controller at the air
conditioner for 2 seconds to display the indoor
temperature and humidity, and the outdoor temperature.
The display changes every time the INFO button is
pressed.
8. POWERFUL: Press
operation.
ARC447A3
15. FAN
16. SWING
17. SET UP
18. CHILD LOCK
19. C-SLEEP
20. RESET ALARM
21. CANCEL
will automatically change the
.
to adjust the
° °
F to C, monitor
and the display screen
. This powerful function reduces
to intensify cooling or heating
QUG-ARC447A3-09/09