3. Go to [WAN] > [Internet Access]
Firstly set the WAN1 Access Mode to PPPoE / PPPoA, then click the Details Page
button to proceed:
4. On the PPPoE / PPPoA settings tab:
Select the Enable radio button at the top of the page to ensure that the
PPPoE interface is enabled.
Input the username into the Username field and password in the Password
field, as required.
The Service Name does not need to be specified.
If your ISP has provided a static IP address, that can be specified by setting
the Fixed IP setting to Yes and entering the IP in the Fixed IP Address field.
15