Section 9 • Step and PID Device Control Screens
Start Menu Popup Screen
Pressing "Start Menu" on the blower overview screen will
open the "Start Menu" popup screen. The "Start Menu"
screen allows the user to change operating modes and
start the blower package.
• Remote: Pressing the remote pushbutton puts the
blower control in remote mode. The remote mode
pushbutton will only be visible if the confi guration is
correct
• Local: Pressing the Local pushbutton puts the blower
control in local mode.
Blower Package PLC Operation Manual •Vilter/Emerson • 35391BLP
Figure 9-5. Start Menu Popup Screen
• Auto: Pressing the Auto pushbutton puts the blower
control in Auto mode.
• Manual: Pressing the Manual pushbutton puts the
blower control in Manual mode.
• Unit Start: Pressing the Unit Start pushbutton initi-
ates a blower start.
For more information on operating modes, see the sec-
tion on Operational Descriptions.
9 – 5