Editing Device Names - Emerson Vilter PLC Operation Manual

Section 5 • Configuration - Supervisor Level

Editing Device Names

The "Device Names" group of screens allows a user
logged in as "SUPER" to edit names shown on the screen
identifying blower unit and package equipment, instru-
mentation, and alarm and trip designations. To edit the
text fi elds in this group of screens, press on the string in-
put button and use the popup keyboard to edit the text.
Typically, the device names entered in this group of
screens are the designations for each device, instru-
ment, or alarm that relate it back to the P&ID diagram.
The "Device Names" group of screens is divided into
three sections, see Figure 5-3.
Figure 5-4. Defi ne Device Names - Devices and Vessels (Supervisor Level)
5 – 4
DEVICES AND VESSELS
In Figure 5-4, this screen the user may edit device names
shown on the screen for devices, vessels, and equipment
installed on the blower package.
The user may navigate to other screens within the
"Defi ne Device Names" group by using the navigation
buttons on the right side of the screen.
Blower Package PLC Operation Manual •Vilter/Emerson • 35391BLP