Notes On Possible Personal Injury - Samson 2417 Series Mounting And Operating Instructions

1.2 Notes on possible personal injury

WARNING
!
Crush hazard arising from moving parts.
The regulator contains moving parts (actuator and plug stems), which can injure hands
or fingers if inserted into the valve.
Î Do not insert hands or fingers between the set point springs while the regulator is in
operation.
Î Before performing any work on the regulator, depressurize the plant. Disconnect or
shut off the external control line.
Damage to health relating to the REACH regulation.
If a SAMSON device contains a substance which is listed as being a substance of very
high concern on the candidate list of the REACH regulation, this circumstance is indicat-
ed on the SAMSON delivery note.
Î Read information on safe use of the part affected, see u http://www.samson.de/
reach-en.html.
Risk of personal injury due to residual process medium in the regulator.
While working on the regulator, residual process medium can escape and, depending
on its properties, may lead to personal injury, e.g. (chemical) burns.
Î If possible, drain the process medium from all the plant sections concerned and the
regulator.
Î Wear protective clothing, safety gloves and eyewear.
Risk of burn injuries due to hot or cold components and pipelines.
Depending on the process medium, regulator components and pipelines may get very
hot or cold and cause burn injuries.
Î Allow components and pipelines to cool down or heat up.
Î Wear protective clothing and safety gloves.
EB 2517 EN
Safety instructions and measures
9