Samson 2417 Series Mounting And Operating Instructions page 38

Servicing
WARNING
!
Risk of burn injuries due to hot or cold com-
ponents and pipeline.
Regulator components and the pipeline may
become very hot or cold. Risk of burn inju-
ries.
− Allow components and pipelines to cool
down or heat up.
− Wear protective clothing and safety gloves.
NOTICE
!
Risk of regulator damage due to incorrect
servicing or repair.
Service and repair work must be performed
by trained staff only.
NOTICE
!
Risk of regulator damage due to excessively
high or low tightening torques.
Observe the specified torques on tightening
regulator components. Excessively tightened
torques lead to parts wearing out quicker.
Parts that are too loose may cause leakage.
Observe the specified tightening torques.
NOTICE
!
Risk of regulator damage due to the use of
unsuitable tools.
Only use tools approved by SAMSON.
38
NOTICE
!
Risk of regulator damage due to the use of
unsuitable lubricants.
Only use lubricants approved by SAMSON.
Note
SAMSON's After-sales Service department
can support you concerning lubricant,
tightening torques and tools approved by
SAMSON.
Note
The regulator was checked by SAMSON
before it left the factory.
− Certain test results (seat leakage and leak
test) certified by SAMSON lose their validi-
ty when the regulator is opened.
− The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-sales
Service department.
− Only use original spare parts by
SAMSON, which comply with the original
specifications.
Tip
SAMSON's After-sales Service department
can support you in drawing up an inspection
and test plan for your plant.
EB 2517 EN