Malfunctions
7.9 Ordering spare parts and
operating supplies
Contact your nearest SAMSON subsidiary
or the SAMSON After-sales Service depart-
ment for information on spare parts, lubri-
cants and tools.
Spare parts
See section 10.2 for details on spare parts.
Lubricants
Contact the SAMSON's After-sales Service
department for more information on suitable
lubricants.
Tools
Contact the SAMSON's After-sales Service
department for more information on suitable
tools.
44
8 Malfunctions
The malfunctions listed in Table 9 are caused
by mechanical faults and incorrect regulator
sizing. In the simplest case, the functioning
can be restored following the recommended
action. Special tools may be required for re-
pair work.
Exceptional operating and installation condi-
tions may lead to changed situations that
may affect the control response and lead to
malfunctions. For troubleshooting, the condi-
tions, such as installation, process medium,
temperature and pressure conditions, must
be taken into account.
SAMSON's After-sales Service department
can help during troubleshooting. Further in-
formation is available in section 10.1.
We recommend removing the regulator from
the pipeline before repairing it.
Tip
SAMSON's After-sales Service department
can support you in drawing up an inspection
and test plan for your plant.
Note
Contact SAMSON's After-sales Service
department for malfunctions not listed in the
table.
EB 2517 EN