Controller - Acson ACM 30D Technical Manual

8
9
2
TEMP
5
TIMER
1. "ON/OFF" SWITCH
• Press to start the air conditioner unit.
• Press again to stop the unit.
2. TEMPERATURE SETTING
• Set the desired room temperature.
• Press button to increase or decrease the
set temperature. Setting range are between
16 to 30 (60 F to 80
°C °C °
3. OPERATION MODES
• Press the "mode" button for select the type
of operating mode.
- Cooling Only :
COOL, DRY, FAN
- Heat Pump :
AUTO, COOL, DRY, HEAT, FAN
(AUTO mode is represented by both
COOL and HEAT LED light on)
4. FAN SPEED SELECTION.
• Press the button until the desired fan speed
is achieved.
5. TIMER.
• Press the set button to select the switch
timer of the air conditioner unit (the setting
range is between 1 to 10 hours).
SENSOR
ON/OFF
AUTO COOL
HIGH DRY
FAN MODE
MED HEAT
FAN
LOW
SWING SLEEP
SLM
F).
°
4
4
1
3
7
6
5
7
AC-5300 (OPTIONAL)
6. "SLEEP" MODE
• Press button to activate the sleep
function can only be activated under
"cool" or heating mode operation.
activated under "cool" mode operation, the
set temperature will increase 0.5
minutes, 1
°C after 1 hour and 2°C after 2
hours. If it is actiaved under "HEAT" mode
operation, the set temperature will be
descreased 0.5
after 1 hour and 2
7. AIR SWING
• Press button to activate the automatic air
swing function.
8. SENSOR
• Infra red sensor to receive signals from
wireless controller.
9. LED DISPLAY
• To display the set temperature (in
timer delay setting (in hours).
10. TRANSMISSION SOURCE
• To transmit signals to the air conditioner.
15
FAN ON/OFF
TEMP
SWING SLEEP
TIMER MODE
°C after 30
°C after 30 minutes, 1°C
°C after 2 hours.
°C) and
10
1
2
6
3