Programming The Desired Remote Code - Sony RMN-U1 Operating Instructions Manual

Programming the desired
remote code
You can program the remote code so that this unit
can control devices that it is normally unable to
control.
1
Press HOME on the unit.
The HOME screen appears.
2
Tap the "Device" tab.
3
Tap " Add Device."
A confirmation screen appears.
4
Tap "Next b."
5
Tap "Learn," then tap "Next b."
6
Tap the correct type for your
device, then tap "Next b."
A confirmation screen appears.
7
Tap "Next b."
The key learning screen appears.
8
Tap the key where you want to
store the new command.
A menu appears.
Tip
You can change the page by tapping
menu.
9
Tap "Learn."
Instructions on how to store the new
command are displayed.
10
Program the remote code to the
key of the remote screen referring
to the on-screen instructions.
Tip
When programming remote control keys, it may
help to tap and hold the key you are programming a
little longer.
11
Tap on the side menu.
A confirmation screen appears.
12
Tap "Yes."
on the side
51 GB