Setting Up The Ip Address/Proxy Server - Sony RMN-U1 Operating Instructions Manual
Network remote controller
Hide thumbs
Also See for RMN-U1:
- Quick setup manual (2 pages) ,
- Quick setup manual (2 pages) ,
- Instruction & operation manual (14 pages)
Table of Contents
Advertisement
Setting up the IP address/
proxy server
You may have to use a fixed IP address and proxy
server, depending on your home network settings,
or the specifications of the Internet service
provider.
For details on the input values in the following
procedures, refer to the operating manual of the
respective device or the information provided by
the person who set up your wireless network or
your Internet service provider.
To use a fixed IP address
The unit is set to obtain the IP address
automatically as the factory setting, however, you
can use a fixed IP address, depending on your
network settings.
1
Press HOME on the unit.
The HOME screen appears.
2
Tap “
Settings.”
The settings menu appears.
3
Tap “Network Settings.”
The connection type screen appears.
4
Tap “Advanced Settings,” then tap
Next b
“
.”
5
Tap “DHCP Setting,” then tap
Next b
“
.”
6
Next b
Tap “Manual,” then tap “
.”
7
Enter the values for “IP Address,”
“Subnet Mask” and “Default
Gateway.”
For details on how to input characters, see
“Entering text” (page 19).
8
Next b
Tap “
.”
9
Enter the values for the “Primary
DNS” and “Secondary DNS”
settings.
For details on how to input characters, see
“Entering text” (page 19).
10
Next b
Tap “
.”
A confirmation screen appears.
GB
11
Tap “OK.”
“Connection is complete.” appears.
Refer to “Network connection” (page 72), if
you were unable to make the desired network
connections.
12
Make the server settings.
To enjoy content stored on the server over the
network that has been set up in this section,
you need to set up your server first (page 32).
Tip
If you want to obtain the IP address automatically using
DHCP, select “Auto” for the IP address settings in step 6.
If you select “Auto” in step 6, the DNS settings selection
screen appears. In this case, select “Auto” or “Manual” for
DNS settings and enter the respective values following the
instructions that appear on the display.
To use a proxy server
If you need to use a proxy server (for example,
when you are instructed to use a proxy server by
your Internet service provider), be sure to prepare
the proxy address and the port number in advance.
1
Press HOME on the unit.
The HOME screen appears.
2
Tap “
Settings.”
The settings menu appears.
3
Tap “Network Settings.”
The connection type screen appears.
4
Tap “Advanced Settings,” then tap
Next b
“
.”
5
Tap “Proxy Setting,” then tap
Next b
“
.”
6
Next b
Tap “Use,” then tap “
.”
7
Enter the values for “Address:” and
“Port:”
For details on how to input characters, see
“Entering text” (page 19).
8
Next b
Tap “
.”
A confirmation screen appears.
9
Tap “OK.”
“Connection is complete.” appears.
Refer to “Network connection” (page 72), if
you were unable to make the desired network
connections.
Page 28
Advertisement
Table of Contents
