Changing The Renderer (Network Controlled Player) Currently Being Used - Sony RMN-U1 Operating Instructions Manual

To delete a server
You can delete a server you do not want to display
on the screen.
1
Tap and hold the server you want to
delete in step 5 of "Listening to audio
content on your server" (page 35).
A menu appears.
2
Tap "Delete."
The selected server is deleted.
Tip
The server on your home network is displayed on the
server list of this unit even if you have deleted it before.
Disconnect your server if you do not want to display it on
the server list from your home network. Refer to the
operating manual of your server for details.
Changing the renderer
(network controlled
player) currently being
used
1
Tap on the side menu while
playing back content.
The renderer (network controlled player) list
appears.
38 GB
2
Tap the desired renderer (network
controlled player).
3
Tap "OK."
The audio content is played back on the
selected device.
Notes
•
You may not be able to change the renderer (network
controlled player) if the selected content has restrictions
on streaming.
•
does not appear in the following cases.
–
During a PARTY
–
While playing back content that cannot be delivered
again by the server
To add a renderer (network
controlled player)
You can add a device with the PARTY
STREAMING function as a renderer (network
controlled player).
1
Tap on the side menu while
playing back content.
The list of devices that are utilizing the
PARTY STREAMING function is displayed.
2
Select the desired renderer (network
controlled player).
Tip
All devices are selected with the default setting.
3
Tap "OK."
Note
You cannot select a device which has joined another
PARTY or is turned off.