Setting Up A Renderer (Network Controlled Player); Listening To Audio Content On Your Server - Sony RMN-U1 Operating Instructions Manual

11
Add a check mark next to [Allow new
devices and computers
automatically] and select [OK].
Refer to "Listening to audio content on your
server" (page 35) or "Watching/viewing
content on your server" (page 44) for
instructions on how to select the server.
Note
Uncheck this item after you confirm that the unit
can connect to the server and audio content on the
server.
Setting up a server other than
Windows 7, Windows Vista or
Windows XP
The set-up method is different depending on the
server. Refer to the operating instructions of your
server.
Setting up a renderer
(network controlled
player)
The set-up method is different depending on the
device. Refer to the operating instructions of your
device.
1
Turn the renderer (network
controlled player) on.
2
Connect the renderer (network
controlled player) to your home
network.
3
Permit access from this unit on the
renderer (network controlled
player) side.
Listening to audio
content on your server
You can listen to audio content from the desired
device. How to select "PC/HDD Music" as an
Activity is explained in this section.
1
Press HOME on the unit.
The HOME screen appears.
2
Tap the "
Device
3
Tap the desired renderer (network
controlled player).
Activities that can be played back with the
selected renderer (network controlled player)
are displayed.
4
Tap "PC/HDD Music."
Item Description
Now Playing Tap to display the playback
screen.
PC/HDD Tap to listen to "PC/HDD
1
Music* Music."
Music Tap to listen to "Music
1
Services* Services."
1
iPod & iPhone* Tap to listen to "iPod &
iPhone."
1 2
DAB/DAB+* * Tap to listen to "DAB/
DAB+."
1
Audio IN* Tap to listen to "Audio IN."
Use remote (IR) Tap to display the infrared
remote control screen of the
selected device.
" tab.
35 GB