Table of Contents
Advertisement
Operation: User interactions
Display
Pos . Display
1
2
3
4
5
6
7
ACT-7
1
Current temperature
Defrost (active)
Air Condition (active)
Alarms (flashing):
•
H = High pressure
•
L = Low pressure
Tank full indicator
(flashing)
Fan speed
Overheat warning
22
c
HL
2
3
4
5
Fig. 7
Description
Measured sensor temperature.
The ACT-7 runs the defrost mode when needed and auto-
matically returns to cooling/fan only mode when finished.
The ACT-7 is in air condition mode.
The alarm has to be reset (see "Menu overview" on page
14) when the error has been rectified (find help for trou-
ble shooting on page 16).
The alarm resets itself and works as follows:
1.
When the alarm appears the ACT-7 will continue to
work for the next 30 seconds.
2.
If the condensate tank has not been emptied, the
pump continues to operate while the ACT-7 stops
cooling.
3.
When the condensate tank is emptied, the alarm will
disappear and the ACT-7 will restart after a delay of 6
minutes.
Displaying the fan speed adjusted by the fan speed dial.
Indoor temperature is too high (above 35 °C). The symbol
will disappear automatically, when the room temperature
drops below 35°C and the ACT-7 starts up again.
(see also "Trouble shooting" on page 16)
7
6
13
Advertisement
Table of Contents
