Erasing All Settings - To Reset The Commander To Its Factory Settings - Sony RM-VL710 Operating Instructions Manual

Erasing all settings
— To reset the
Commander to its
factory settings
You can erase all remote control
signals programmed by the
"learned" function to reset the
Commander to its factory settings.
SET
TV VCR CBL
1 2
4 5
8
7
0
1
POWER
DVD AMP
3
6
9
ENT
1
While holding POWER
pressed, press TV/VIDEO
and VOL –.
+ TV/VIDEO
POWER
The SET indicator and all
Component Select buttons light
up. Then the Component Select
buttons turn off one by one
from the left, followed by the
SET indicator. When the SET
indicator turns off at last, all
settings are cleared, and
Commander returns to its
original state.
SET
TV VCR
SET
TV VCR
SET
TV VCR
SET
TV VCR
VOL
+
CBL DVD AMP
CBL DVD AMP
CBL DVD AMP
CBL DVD AMP
33