Erasing All Settings - To Reset The Commander To Its Factory Settings - Sony RM-VL610T Operating Instructions Manual

Erasing All Settings
— To reset the Commander to
its factory settings
You can erase all remote control signals
programmed by the "learned" function to reset the
Commander to its factory settings.
1
Press and while holding 1, press t and
2 –.
When pressing the 1 button and the t button,
all the Component Select buttons go off. When
pressing the 2 – button while holding down
the 1 button and the t button, the SET
indicator lights up and the Component Select
buttons light up one by one. When the SET
indicator turns off at last, all settings are cleared,
and the Commander returns to its original state.
26