Sony RM-VL710 Operating Instructions Manual page 15

2
Press and hold SET for over
3 seconds.
SET
The SET indicator lights up,
and all Component Select
buttons flash.
SET
TV VCR
3
Press the Component Select
button for the component
whose signals are to be
"learned."
Both the SET indicator and the
selected Component Select
button light up, and all other
buttons turn off.
SET
TV VCR
CBL DVD AMP
CBL DVD AMP
4
Press the button on the
Commander you want to
"teach."
Both the SET indicator and the
selected Component Select
button flash (Learning function
standby).
SET
TV VCR
If another signal has already
been "learned" by that
button
The SET indicator flashes
twice, and the Commander
takes no action returning to its
state after the Component
Select button was pressed in
Step 3. Either "teach" to
another free button, or clear the
already "learned" function
(page 20) and start over from
the beginning.
CBL DVD AMP
Continued
15