Protekt WR 100-06 Instruction Manual

it is obligatory to verify the free space required beneath the user at the workplace before each occasion of use
!
the fall arrest system, so that, in the case of a fall, there will be no collision with the ground or other obstacle in
the fall path. The required value of the free space should be taken from instruction manual of used equipment.
! there are many hazards that may affect the performance of the equipment and corresponding safety precautions
that have to be observed during equipment utilization, especially:- trailing or looping of lanyards or lifelines over
sharp edges,- any defects like cutting, abrasion, corrosion,
! - climatic exposure,- pendulum falls,- extremes of temperature,- chemical reagents,- electrical conductivity.
! personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or
foil bag or cases made of steel or plastic) to protect it against damage or moisture.
! the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the
equipment. For textile products use mild detergents for delicate fabrics, wash by hand or in a machine and rinse
in water. Plastic parts can be cleaned only with water. When the equipment becomes wet, either from being in
use or when due cleaning, it shall be allowed to dry naturally, and shall be kept away from direct heat. In metallic
products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better
operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of
the equipment.
! personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct
light, ultraviolet degradation, damp environment, sharp edges, extreme temperatures and corrosive or
aggressive substances.
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN
THE DETAILS REQUIRED. THE IDENTITY CARD SHOULD BE FILLED IN ONLY BY A COMPETENT PERSON
RESPONSIBLE FOR PROTECTIVE EQUIPMENT. THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST
USE OF THE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE: PERIODIC INSPECTIONS,
REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED. THE IDENTITY CARD
SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE
EQUIPMENT WITHOUT THE IDENTITY CARD.

IDENTITY CARD

MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
SERIAL NUMBER
USER NAME
DATE OF PURCHASE
PERIODIC EXAMINATION AND REPAIR HISTORY
REASON FOR CONDITION OF DEVICE
DATE
SERVICING/REPAIR
1
2
3
4
5
EC type examination carried out by CETE APAVE SUDEUROPE, BP 193, 13322 Marseille, France - 0082
PROTEKT, 93-403 LODZ, ul. Starorudzka 9, POLAND, TEL: (48 42) 680 20 83, FAX:
DATE OF MANUF.
DATE OF FIRST USE
NAME AND SIGNATURE
AFTER SERVICING OF COMPETENT PERSON
(48 42) 680 20 93, www.protekt.com.pl
Instruction Manual
Read carefully
the manual
before use
the equipment

ESSENTIAL FEATURES

The retractable-type fall arrester device WR 100 a component of the personal protective equipment
against falls from a height and conforms to EN 360:2002. The fall arrester is the protection for one person
only. The working length is 6m.

MARKING OF THE FALL ARRESTER

NEXT
EXAMINATION
DATE
Device manufacturer
or distributor
Reference number
of the device
Month and year
of manufacture
RETRACTABLE TYPE FALL ARRESTER
Reference number:
Swivel handle for
anchoring to a structure
Identity label
Webbing retractor with brake
and energy dissipating mechanism
inside plastic casing
Working webbing
made of 17mm
polyester/kevlar webbing
Snap hook with swivel function
and fall indicator
Inspect
range
the device
of operating
before each
temperatures
use
maximal admissible
check locking
deflection of the cable
before each
from the vertical line
use
Number of European Standard
Retractable type fall arrester / Dispositivo Retractil
Antichute a rappel autom. / Höhensicherungsgerät
Pára-quedas de encravamento automático
Dispositivo anticaduta di tipo retrattile
WR 100 06
Reference No.:
Serial number / Lote / Numero
mm.yyyy
Date of manufacture:
Serien nr. / Remessa / Lotto
WR 100-06
use only a full body
harness conformed
to EN 361
don't realese rapidly
unwinded cable
don't repair
the device
yourself
don't use the device
with damaged
cable
before use
read the manual
admissible weight
of the user
XXX kg
store the device in
a protected place
CE mark and number of notified body
inspecting the equipment according to
the article 11 of Directive 89/686/EEC
type of the equipment
serial number
0000000
of the device