Unpacking - Mitsubishi Electric CP-M1 Operation Manual

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.
Open the printer box from the top and remove
the top cushion containing the accessories out
of the box.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the figure.
• The printer weighs about 14 kg. Handle it with care.
Unwrap the packing.
Remove the protective materials for transportation such as
protective sheet.
Hold the printer by the front and rear handle as illustrated in the
drawing.
• When the printing unit is not closed completely or the
latch bar is accidentally pressed, the printing unit may
open. It can cause injury or damage.
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Quick setup Safety guide
guide
NOTE
Power cord Paper tray
Paper strip bin
The printer comes installed with paper strip bin.
Accessories
6