Other Cautions - Mitsubishi Electric CP-M1 Operation Manual

SAFETY PRECAUTIONS
HEAD ABRASION
The thermal head, like the video head, wears out. When it is abraded, it becomes hard to print out fine details of the picture. In
such a case, it is necessary to replace the thermal head. Consult with the sales dealer for replacing the head.
CONNECTING DEVICES
Read thoroughly "Operating Precautions" of the instruction booklets for the devices connected with the Digital Color Printer. The
power cord must be disconnected after printing is over.
CAUTION ON RELOCATING
When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage.
Further, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices.
• Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error.
• Dust or other foreign materials adhering to the print paper or the ink ribbon, or deformation resulting from exposure to
extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.
• Depending on the internal temperature, the printer may stop printing temporarily during printing. Please wait for the printer to
resume printing.
Do not touch the print paper.
• Each time printing is completed, remove the prints. If the prints are not removed, a paper jam may occur.
Empty the paper strip bin frequently to prevent jamming the strips at the print outlet.
•
• The paper tray is used for storing the cut print paper (10x15 (4x6") and 9x13 (3.5x5")) temporarily. The print paper may fall
from the tray or may not be stored in the printed order.
• Do not use the printer in a place where a strong wind blows. Otherwise, the print paper may not be fed properly, resulting in
the paper jam.
• Do not move the printer or do not open the printing unit during printing. It may cause a printing failure.
• The paper strip bin may become discolored if the printer is used in a high-humidity environment.
NOTE:
YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN
OCCURRENCE OF A MALFUNCTION.

OTHER CAUTIONS

4