Table of Contents
Advertisement
UNPACKING
Take the printer out of the box by the following procedures. Make sure to check the accessories.
Open the printer box from the top and remove
the top cushion containing the accessories out
of the box.
Remove the protective cardboard and then take the accessories
out of the cushion.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the figure.
Printer weighs about 12 kg for a single-deck (CP-D70DW-S)
or 22 kg for a double-deck (CP-D707DW-S). Handle them with
care.
Handling the double-deck system (CP-D707DW-S) will
require two adults.
Unwrap the packing.
Remove the protective materials for transportation such as
protective sheet.
Remove the paper strip bin before carrying the printer.
Hold the printer by the front and rear handle as illustrated in the
drawing.
Do not carry the printer with the paper strip bin attached and by
holding the part under the paper strip bin. The paper strip bin
may be removed and fall. It may cause injury or damage.
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Quick setup
CD-ROM
guide
All manuals and user guides at all-guides.com
UNPACKING
NOTE
CAUTION
Power cord
Cable ties
Paper flanges
Spacers
CP-D70DW-S : 1 set
CP-D707DW-S : 2 sets
Each set is stored in the respective printing units.
CP-D70DW-S
Protective
cardboard
Paper tray
Securing band
(CP-D70DW-S 1
Screws, Washer
CP-D707DW-S 2)
Ink cassette
Paper strip bin
Make sure to remove the protective
materials from the ink cassette and
paper flanges.
CP-D707DW-S
Accessories
6
Advertisement
Table of Contents
