Side And Rear Panels - Mitsubishi Electric CP-M1 Operation Manual

FEATURES AND FUNCTIONS
INSTALLING THE PAPER TRAY
• Remove the paper tray when printing in 13x18 (5x7") or 15x20 (6x8") size.
RIGHT SIDE PANEL
VENTILATION OUTLETS
1
These outlets are for cooling the inside of the printer.
2
VENTILATION INLETS
These inlets are for cooling the inside of the printer.
3
HANDLE FOR TRANSPORTING
Use this handle along with the front handle for a secure
and strong grip when carrying or moving the printer.
SECURING THE POWER CORD
AND USB CABLE
1. Wrap a cable tie around the power cord
or the USB cable.
2. Draw the tie through the securing hole on
the rear panel and secure it.
1. Engage the upper hooks of
the tray in the upper holes
of the paper strip bin.
NOTE

SIDE AND REAR PANELS

REAR PANEL
2
1
(Example)
2. Then, secure the tray by
engaging the lower hooks in
the lower holes of the bin.
3 4 6
4 5
4
SECURING HOLES FOR THE CABLE TIE
Use to secure the power cord or USB cable by using
the cable ties.
5
POWER SOCKET (AC LINE)
Use to connect the provided power cord. Insert the
cord firmly.
6
USB TERMINAL
Use to connect the USB cable.
LEFT SIDE PANEL
2
See page 14.
Securing hole
for the cable tie
8