Unpacking - Mitsubishi Electric CP-D707DW Operation Manual

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.
Open the printer box from the top and remove
the top cushion containing the accessories out
of the box.
Remove the protective cardboard and then take the accessories
out of the cushion.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the figure.
Printer weighs about 12 kg for a single-deck (CP-D70DW) or
22 kg for a double-deck (CP-D707DW). Handle them with care.
Handling the double-deck system (CP-D707DW) will require
two adults.
Unwrap the packing.
Remove the protective materials for transportation such as
protective sheet.
Remove the paper strip bin before carrying the printer.
Hold the printer by the front and rear handle as illustrated in the
drawing.
• Do not carry the printer with the paper strip bin attached and
by holding the part under the paper strip bin. The paper strip
bin may be removed and fall. It may cause injury or damage.
• When the printing unit is not closed firmly or you press the
OPEN button accidentally, the printing unit may open. It can
cause injury or damage.
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Quick setup
CD-ROM
guide
UNPACKING
NOTE
CAUTION
Power cords Cable ties
Paper flanges Spacers
CP-D70DW : 1 set
CP-D707DW : 2 sets
Each set is stored in the respective printing units.
CP-D70DW
Protective
cardboard
Paper tray
Securing band
(CP-D70DW 1
Screws, Washer
CP-D707DW 2)
Ink cassette Paper strip bin
Make sure to remove the protective
materials from the ink cassette and
paper flanges.
CP-D707DW
Accessories
6