Unpacking - Mitsubishi Electric CP-D90DW Operation Manual

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.
Open the printer box from the top and remove
the top cushion containing the accessories out
of the box.
Remove the protective cardboard and then take the accessories
out of the cushion.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the figure.
• The printer weighs about 14 kg. Handle it with care.
Unwrap the packing.
Remove the protective materials for transportation such as
protective sheet.
When carrying the printer, hold the handle on the left side and
the recessed area on the right side as illustrated in the drawing.
• Do not carry the printer with the paper strip bin
attached and by holding the part under the paper strip
bin. The paper strip bin may be removed and fall. It
may cause injury or damage.
• When the printing unit is not closed firmly or you
press the OPEN button accidentally, the printing unit
may open. It can cause injury or damage.
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Quick setup CD-ROM
guide
NOTE
CAUTION
Power cords Cable ties
Paper flanges Spacers
These are contained in the printer unit.
Protective
cardboard
Securing band, Paper tray
Screws, Washer
Ink cassette Paper strip bin
Make sure to remove the protective
materials from the ink cassette and
paper flanges.
Accessories
6