Adjusting The Beam Interval To Avoid Key Misoperation - Sony RM-AV2500T Operating Instructions Manual

Adjusting the beam
interval to avoid key
misoperation
You can control the beam interval of the
commander. This prevents an
unexpected action caused by
mistouching a commander key. The
factory setting is 0 seconds.
To adjust the keys of each
Component button
3
TV SAT VCR
CD MD
TAPE
1
While pressing COMMANDER
OFF, press PROGRAM – and the
component button.
PROGRAM
PROGRAM
1
DVD CBL AMP
M1 M3
M2
The keys of the selected component
appear as set at the factory.
0 second: Stays lit
1 second: Flashes
2 seconds: Flashes slowly
2
Press the key you want to adjust.
The beaming time is changed with
each press of the key (from 0 to 2
seconds).
3
Press the COMMANDER OFF
button.
Continued
GB
51