Communication With Pcm600 And Sam600 System; Common Write - ABB SAM600 Series Engineering Manual

1MRK 511 433-UEN B
Section 6
The communication between PCM600 and SAM600 system is independent of the
communication protocol used within the substation. The communication media for SAM600
system is USB.
Any USB on a SAM600 module can be used to connect PCM600 in order to establish a
connection with a SAM600 system.
Access to a SAM600 system is possible only through PCM600 and a physical connection to any
SAM600 module in a SAM600 system is through USB, see
IEC18000116 V1 EN-US
Figure 43: SAM600 system communication with PCM600
6.1

Common write

Once a SAM600 system engineering is completed, the system writes the configuration to a
SAM600 system.
Perform Common Write action from a SAM600 system context menu by selecting Write to
IED...option, see
SAM600 Process Bus I/O System
Engineering manual
Communication with PCM600 and
SAM600 system
Figure 44.
© Copyright 2017 ABB. All rights reserved

Communication with PCM600 and SAM600 system

GUID-6C333AA9-C562-49EB-8BC9-0A0B4B76984E v1
Figure 43.
GUID-6D2ACB6C-B1AC-4FFC-8576-823767E1B31B v1
Section 6
41