Self-Supervision; Communication; Indication Leds - ABB RIO600 Product Manual

ABB
Remote I/O
RIO600
Product version: 1.0
RIO600
Ready Ready Ready
            
IRF
Rx/Tx
10M/100M
PSM_H PSM_H LECM
RIO600 con guration : 40 channels with 24 DI + 16 DO ( 3*DIM8_H + 4*DOM )
RIO600
Ready Ready Ready
            
IRF
Rx/Tx
10M/100M
PSM_H PSM_H LECM
RIO600 con guration : 40 channels with 40 DO ( 10*DOM )
GUID-FBC8542C-1954-4F29-BE46-34997C36F721 V1 EN
Figure 2. RIO600 remote I/O unit configuration examples

4. Self-supervision

RIO600 has built-in self-supervision feature which
continuously monitors the state of the RIO600
hardware and the operation of the software. Any
fault or malfunction detected is used for alerting
the operator. The dedicated LED is provided to
indicate the failure. RIO600 self-supervision status
is also distributed to the IEC 61850 station bus as
one data entry in the published GOOSE frame.
One of the output contact of DO module can also
be configured to indicate the status of RIO600.

5. Communication

RIO600 supports the horizontal GOOSE
communication of the IEC 61850 substation
automation standard.
RIO600 is designed to send and receive binary
signals to or from the ABB Relion
and the station automation device COM600 using
the IEC 61850-8-1 GOOSE (Generic Object
Oriented Substation Event) profile.
Ready Ready Ready
IRF IRF IRF
DI1 DI1 DI1
DI2 DI2 DI2
DI3 DI3 DI3
DI4 DI4 DI4
DI5 DI5 DI5
DI6 DI6 DI6
DI7 DI7 DI7
DI8 DI8 DI8
DIM8_H DIM8_H DIM8_H
Ready Ready Ready Ready
IRF IRF IRF IRF
DO1 DO1 DO1 DO1
DO2 DO2
DO2 DO2
DO3
DO3 DO3 DO3
DO4 DO4 DO4 DO4
DOM DOM DOM DOM
RIO600 communication module includes a
galvanic Ethernet RJ-45 port for IEC 61850
GOOSE communication. The used cable type
must be at least Shielded Twisted Pair (STP)
CAT5e.
Using the same Ethernet port, RIO600 can be
connected in parallel to PCM600 and a Web
browser over the same communication bus.

6. Indication LEDs

RIO600 is equipped with different indication LEDs
available on different modules.
• Ready LED on all modules
• Status indication LED for each binary input and
output
• Communication diagnostic LED on the
communication module
®
series IEDs
Ready Ready Ready Ready
IRF IRF IRF IRF
DO1 DO1 DO1 DO1
DO2 DO2 DO2 DO2
DO3 DO3 DO3
DO3
DO4 DO4
DO4 DO4
DOM DOM DOM DOM
Ready Ready Ready Ready
IRF IRF IRF IRF
DO1 DO1 DO1 DO1
DO2 DO2 DO2 DO2
DO3 DO3 DO3 DO3
DO4 DO4 DO4 DO4
DOM
DOM DOM DOM
1MRS757487 A
Ready Ready
IRF
IRF
DO1 DO1
DO2 DO2
DO3 DO3
DO4 DO4
DOM DOM
5