1MRK 511 431-UEN -
SAM600 Process Bus I/O System
Engineering Manual
Communication with PCM600 and SAM600 system
Communication with PCM600 and
SAM600 system
The communication between PCM600 and SAM600 system is independent of the
communication protocol used within the substation. The communication media for
SAM600 system is USB.
Any USB on a SAM600 module can be used to connect PCM600 in order to
establish a connection with a SAM600 system.
Access to a SAM600 system is possible only through PCM600 and a physical
connection to any SAM600 module in a SAM600 system is through USB, see
Figure
40.
IEC 61850 Station Bus
IED
Ctrl
Prot
SAM600
SAM600
-TS
IEC 61850-9-2
downlink ports
Sensor
Figure 40: SAM600 system communication with PCM600
IED
IEC 61850-9-2
uplink ports
USB
SAM600
-CT
-VT
Section 6
PCM600
41