Miscellaneous Sam600 Tools; Get Serial Number; Set Time - ABB SAM600 Series Engineering Manual

1MRK 511 433-UEN B
5.6

Miscellaneous SAM600 tools

SAM600 supports additional features like Get Serial Number, Set Time, Simulation Mode, and
Reset to factory default. These are designed to achieve a specific purpose.
Status of the action performed on the SAM600 Commands are displayed on the PCM600
output window.
5.6.1

Get serial number

Get Serial Number tool can be launched from a SAM600 system configuration context menu.
This tool will read the Serial Number of all the hardware modules configured in a SAM600
system and assign it to the corresponding hardware module.
It is also possible to assign the serial number manually to the SAM600 module which is then
assigned to the corresponding hardware module. Validation errors to be taken care before the
serial numbers are assigned to the hardware modules.
Identify Module option in Get Serial Number functionality identifies the physical module when
selected. When Identify Module is selected, the LEDs on the corresponding hardware module
flashes for 20 seconds.
5.6.2

Set time

Set Time can be launched from a SAM600 system configuration context menu, see
This sets the system time on SAM600-TS module of a SAM600 system to the local PC time.
This menu appears if there is at least one SAM600-TS is available in a SAM600 system.
IEC18000670 V1 EN-US
Figure 39: PCM600: Set Time
SAM600 Process Bus I/O System
Engineering manual
All miscellaneous tools in PCM600 requires an online connection to a SAM600
system.
© Copyright 2017 ABB. All rights reserved
Section 5
SAM600 Engineering
GUID-8C0B444E-57DE-466C-9EBB-B8785EC0375B v1
GUID-1453E511-A15C-4A9F-8680-90A81CC1734C v1
GUID-B5B511AD-0AE0-461C-AF44-682FD19F0E74 v1
Figure 39.
37