Operation With A Router; Operation With A Pabx - Gigaset SL450 Owner's Manual

Operation with a router

When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 does not sufficiently suppress the occurring echoes: activate XES mode 2.
¤
OK Normal mode
OK XES mode 1
OK XES mode 2
If there are no problems with echoes, the normal mode (factory settings) should be
activated.

Operation with a PABX

To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on PABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode OK
Setting the flash time
¤
. . . use
. . . possible flash times are listed
Saving an access code (outside line code)
Setting the access code (e.g. "0") for dialling using the fixed line network.
¤
. . . use
Code OK . . . then
Fixed line network:
Rule:
Save:
to select Settings
. . . use to select Tone or Pulse
to select Settings
. . . use
to select Settings
¤
Access external line with: . . . use
code, max. 3 digits
¤
For
dialled
Call Lists: The access code will only prefix numbers from a list (list
of answered calls, list of missed calls, SMS list).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any
telephone number.
¤
Save
. . . press one of the following keys
OK Telephony
Select (
OK Telephony
to select flash time
OK Telephony
. . . use to select when the access code should be
Operation with a router
OK Dialling
= selected)
OK Recall
Select ( = selected)
OK Access
to enter or change access
OK
55